Page-11 All Products - Steel Pipes,Pipe Fittings,Forged Flange,Gate Valves,Compensator Joints,Rubber Hoses

BS1965 EN10253 Butt weld seamless 90deg elbow

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 8000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-24''

About butt weld elbow's manufacture standard, besides ANSI B16.9, DIN2605, there are many other standards, for example EN10253, pipe elbow is a commonly used pipe fitting in pipe installation for connection of pipe bend. Our factory can process the welding, thread or socket on both ends through specific purpose, and...

Contact Now

stainless steel elbow butt welded

Brand: HJ

Packaging: sea-worthy

Model No.: 1/2''-96''

The type of elbows in common use are butt weld, material is stainless steel with different steel grades. There are many angles, such as 30deg, 45deg, 60deg, 90deg, 180deg. If you have special requirement on the butt weld elbows, pls advise the diameter, wall thickness, material and manufacture standard. Because all...

Contact Now

carbon/stainless steel butt weld ANSI pipe end cap

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 800000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-72''

Pipe end cap is one type of seamless pipe fittings that is used for protecting the end of pipe. It is welded in the pipe ends and close the pipeline. We also call this fitting pipe end cap. Caps are similar to the function of blind flange. But blinds can be disassembled by us, for caps, we can`t disassemble them....

Contact Now

carbon steel A105 RF blind flange

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 1000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-60''

Blind flange is one type of forged flanges. Cause there is no bore in the middle of flange, it is called blind flange. Main materials are carbon steel, alloy steel and stainless steel. For carbon steel, ASTM A105 & A105N are required by most project.304, 304L,316, 316L belong to stainless steel blind flange. The...

Contact Now

carbon steel A234WPB 3D 5D pipe bend

Brand: HJ

Packaging: wooden pallets or as per customer request

Supply Ability: 80000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-24''

Pipe bends belong to butt weld pipe fittings, there are many different bend radius, such as 3D, 5D, 7D, 10D etc. Three main materials are carbon steel, alloy steel, stainless steel. Compared with elbows, bend will have tangent length if the customers need. The bend radius is larger than elbows`. When it is more than...

Contact Now

black steel carbon ASTM A234 ANSI tee

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 8000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-72''

Tees are a common use fittings, according to the difference in manufacture process, there are 3 types, including butt weld tees, socket weld tees, threaded tees. Butt welded tees are manufactured according to standard ASME/ANSI B16.9. As for the materials, there are carbon steel, alloy steel and stainless steel....

Contact Now

180deg WP304 long radius pipe elbow

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 8000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-72''

180deg is angle of pipe fitting elbows. They shall be used to change the direction the pipeline. 180deg elbows are widely used in the pipeline project. There are long radius 180deg butt weld elbows & short radius 180deg butt weld elbows. It depends on customers' request. There are many kinds of materials, such as...

Contact Now

ASTM A105 ANSI B16.5 300# WN flange

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 800000000tons

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-60''

Weld neck is a kind of flange type. The technique we manufacture is forging. There are two designs. The regular type is used with pipes. The long type is unsuitable for pipes and is used in process plant. Main materials are carbon steel, alloy steel and stainless steel. For carbon steel, ASTM A105 & A105N are...

Contact Now

90deg CS SMLS BE BW elbow

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 8000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-24''

Our factory can manufacture pipe fitting elbows with different angles. 90deg elbows are very popular in the international market. There are many kinds of materials, such as carbon steel, alloy steel, stainless steel elbows and aluminum elbows. About carbon steel elbows, some people call them black pipe elbow. As for...

Contact Now

weld neck SCH40 ANSI flange

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 800000000tons

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-60''

Weld neck flanges have a long tapered hub, this type of flange is widely used for high pressure applications. If customer would like to order weld neck flange, the thickness of connecting pipe need to be informed. The facing in common use is raised face(RF), flat face(FF) and ring type joint(RTJ). As one of largest...

Contact Now

seamless pipe reducer ANSI B16.9

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 80000000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-24''

Butt welded reducers are a kind of pipe fittings that can be used to the connection of different diameters` pipes. Standard will be in accordance to ASNI B16.9. According to the different shape, they are divided into concentric reducers & eccentric reducers. The concentric & eccentric depends on if center line...

Contact Now

ANSI B16.9 CS SS BW tee

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 9000000

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-72''

Different types of tees have different manufacture standard. Butt welded tees are manufactured according to standard ANSI B16.9. As for the materials, there are carbon steel, alloy steel and stainless steel. Socket welding tees and threaded tees comply with standard ASME B16.11. The size range for forged tees is from...

Contact Now

90deg 180deg butt weld CS SS elbow

Brand: HJ

Packaging: wooden cases, pallets or as per customer request

Supply Ability: 90000000tons

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-72''

Butt welded elbows are a common type of pipe fittings, seamless and welded elbows are widely used in pipeline systems to change the direction of pipeline. According to the project requirements, these elbows shall be customized different angles, such as 30deg, 45deg, 60deg, 90deg, 180deg etc. The materials of elbows we...

Contact Now

ASME B16.11 forged steel coupling

Brand: HJ

Packaging: wooden cases or as per customer request

Supply Ability: 800000000

Min. Order: 1 Piece/Pieces

Model No.: 1/8''-4''

Steel coupling is a piece of short pipe that is used to connect one pipe with another pipe, scope of application is also more widely, like agriculture, industry, construction and so on. Pressure of coupling shall be CLASS3000, CLASS6000, CLASS9000. The standard of these products are in compliance with ASME B16.11. If...

Contact Now

hot rolling stainless steel plate

Brand: HJ

Packaging: As per customer request

Supply Ability: 800000000tons

Min. Order: 10 Ton

Model No.: Thickness: 6mm-650mm

Steel plate or sheet is widely used in construction and industrial field. Because these plates are very easy to weld, cut,form and machine. According to the difference in manufacture process, there are cold rolling and hot rolling.Standard include GB, JIS, DIN,ASTM etc. If the thickness is less than 4mm, it is called...

Contact Now

forged reducing nipple and threaded nipple

Brand: HJ

Supply Ability: 800000pcs

Model No.: 1/8''-12''

Forged nipple is used to connect two pieces of pipeline. There are 2 types, including reducing nipple and threaded short nipple. Some people call reducing nipple as swage nipple. Similar to pipe reducer, the type of swage nipple is concentric swage nipple and eccentric swage nipple. Manufacture standard of reducing...

Contact Now

hot-dipped galvanized sheet metal

Brand: HJ

Packaging: as per customer request

Supply Ability: 8000000tons

Min. Order: 10 Ton

Model No.: Zinc:60-180G/M2

About galvanized, there are 2 techniques,one is hot-dipped galvanized, the other is Electrical galvanized. Galvanized sheet metal have good corrosion resistance and good looking appearance, and the production cost is not very high, so they are widely used in many fields, such as construction, light industry,...

Contact Now

Aluminum plate aluminum alloy plates

Brand: HJ

Packaging: as per customer request

Supply Ability: 800000000tons

Min. Order: 10 Ton

Model No.: 0.2-500mm

Steel plate is rectangular, it is also called steel sheet, besides carbon steel plate, alloy steel plate and stainless steel plate, there is aluminum plate. There are three parts of sizes, including thickness, width and length. The thickness of plate is more than 0.2mm, less than 500mm. Width is above 200mm.And length...

Contact Now

Carbon steel ASTM A234 WPB butt weld reducer

Brand: HJ

Packaging: wooden pallets or as per customer request

Supply Ability: 800000pcs

Min. Order: 1 Piece/Pieces

Model No.: 1/2''-72''

According to the difference in manufacture process, reducers are divided by seamless and welded. For weld reducer fittings, there are one or two seams in the surface. The both ends of reducer is butt weld, so it has another name butt weld reducer. Depending on the shape, there are butt weld concentric reducer and butt...

Contact Now

Stainless Steel Welding Neck Flange

Packaging: Wooden case or Wooden pallet, free-fumigation

Min. Order: 1 Piece/Pieces

Model No.: 1/2"-60"

Welding Neck flange is the most used flange types acc. to ASME B16.5. Welding Neck flanges are bored to match the inside diameter of the mating pipe or fitting so there will be no restriction of product flow. This prevents turbulence at the joint and reduces erosion. They also provide excellent stress distribution...

Contact Now

ANSI Cast Iron Gate Valve

Brand: HJ

Packaging: plywood

Supply Ability: 20000T

Min. Order: 30 Set/Sets

All costumers rate our quality high.ANSI Cast Iron Gate Valve is widely used in natural gas,electric power,metallurgy ,petroleum,chemical,pharmacy,building,water supply and other industries for three performances:availability,reliability and stability. This kind of product is produced and designed according MSS SP-70...

Contact Now

API 5L ERW Steel Pipe

Brand: HJ

Supply Ability: 10000

Min. Order: 20 Metric Ton

ERW PIPE is high-frequency Electrical Resistance Welded Steel Pipe,The hot rolled coil is formed by forming machine,use the skin effect and proximity effect of high frequency current,make the edge of the tube heat and melted,weld it under the action of the extrusion roller to achieve to produce .It is widely used in...

Contact Now

API 5L SSAW Steel Pipe

Brand: HJ

Supply Ability: 10000

Min. Order: 100 Kilometer

The SSAW pipe is widely used in long distance pipeline project for transmission of oil, natural gas, water as well as coal gas etc, and also is used in all kinds of engineering, such as chemical industry, electric power, irrigation,construction and piling etc.It is a spiral welded pipe, which is made of strip plate as...

Contact Now

ANSI DIN BS Blind Flange

Brand: HJ

Packaging: plywood

Supply Ability: 10000

Min. Order: 20 Pack/Packs

Blind flange is also called the blind plate or flange cover,which is a flange without the holes in the middle for sealing the plug of the pipe.There are many types of sealing faces,including flat face,raised face,ring type joint .It is used to insulate or cut off the medium of the pipe,the function is the same the...

Contact Now